It’s been a long time since we posted. We’ve had a big long break as real life has reared its head, but we are back.
Here’s a post with some images of my newest air support 🙂
Forging the Iron Hands Narrative
In this blog post I describe how I am going to create my 40k Iron Hands army along the lines of the 40k universe (or fluff). I intend to make this the first post of two.
This post will cover the chapter and squads, while the second will list known and living characters.
In later joint posts I will also cover my 30k Iron Hands Legion, units and characters.
Guilliman’s Codex Astartes
Firstly a review of how a Space Marine Chapter is formed post heresy. Every chapter is no greater than one thousand marines and split between ten companies, plus supporting divisions with their own heraldry, titles, symbols and history.
The first company is the elite soldiers and veterans of the chapter. The second to fifth are battle companies; the front line of the chapter. The sixth to ninth are the specialist reserve companies and the tenth are formed of scouts. Scout companies are posed of fresh recruits from the chapter home world who later go on to join other companies within the chapter.
The chapter also consists of an Armoury (tech marines, tanks and flyers), Reclusiam (chaplains), Apothecarion (Apothecaries), Librarius (Librarians), and Chapter Command.
The Iron Hands Chapter
Companies are referred to by the Iron Hands as Clans. Clans once represented the competing organisations on the Iron Hands home world of Medusa before the coming of the Great Crusade. Ferrus Manus, primarch of the Iron Hands, kept the formation of Clans in order to encourage their competitive nature historically formed when once fighting for scarce planetary resources.
Each Clan has its own history and character which marines emulate upon joining or being promoted (i.e going from a recruit of the 10th to a full battle-brother of the 3rd).
There is some contradiction around this as previous materials (codexes and novels) state that clans do their own recruitment. However the Clan Ruakaan Supplement differs. I personally think this makes sense given the first companies status as the veteran company.
This is how the Iron Hands Chapter looks under the codex composition:
I will be basing my army primarily around Clan Raukaan, but also drawing from Squads in the 1st, 6th, and the 10th companies. This works well for me because it means I don’t waste most of my Forge World transfers 😉 and I can also use known characters and units from more than one clan.
Known Squads of the Clan Ruakaan
Just as companies are known as Clans, so too are squads known as Clave’s.
I’ve listed them here by Clave number, name, unit type, and any known characteristics in brackets.
Other mentioned squads:
Unfortunately these squads have only been mentioned by number and not name, but I have put them in because their existence and unit type is known.
Clan and Squad Markings
Squad members marked with the icon of their chapter on the left shoulder pad, and their clan on their right. On their left knee pad is marked the number of their Clave and on the right shin is the unit type (tactical, assault, veteran etc.)
Follow me and message me on Twitter @FerrumFrater
I hope the last blog post was well received. As I am sure you are all aware last time we covered my new Marauder Horsemen, which were designed to be a slightly heavier looking type of cavalry unit. This week we will cover something a little different…..
…A Chaos Warshrine conversion. As I waffled on a little last week, I’ll try not to this time. I will not attempt to refer to how I came to this idea. But it is in keeping with my armies Barbarian theme and I wanted a Chaos Shrine that was a little more monstrous and imposing on the battlefield. So I decided that I would mount my shrine on a Mammoth.
Once I had all the bits I set about construction of the Mammoth completing the whole assembly apart from the rider’s seat on the Mammoth’s back. I found this was helpful as it allowed me nearly full access to the inside of the Mammoth’s shell while having a nice solid base to work from. Next I processed to clean up the Mammoth making sure I removed all mould lines and filling all gaps with green stuff. This can be a little tricky but I found holding the model up to the light meant I could easily see small gaps, especially on the underside.
While I left this to set and dry, I started construction of the shrines basic floor plate, adding the sides, where needed for a little strength. (The sides were temporarily to proved a little perspective of size and fit). Once dry and holding together reasonably well, I started a little bit of concept work, which was basically plonking one down on top of the other as in the first picture.
As you can see from the picture the Warshrine was a little too big for the Mammoths back, and it was also obvious to me at this point, I needed to do something to ‘bind’ the two together, as floating in mid air on his back wouldn’t look right. This is where my evil twin @CPJohnson, came in with another inspirational idea, a Howdah!
At this point any Howdah would need to be constructed out of an easy to manipulate material that was of varying sizes as the back of the mammoth is a lot further down than the front. Again @CPJohnson came up with another brilliant idea as if it was nothing, coffee sticks! (I am sure you see why I call him my evil twin, it’s down right depressing at times trust me). This construction material was perfect as it was small enough for me to manually manipulate it to fit the required size and already had the characteristics of wood. It was also free from any good retailer 🙂
Yes I did!
In practice though, the construction was not as easy as it might appear. First I clipped the back off the Shrine, losing the hole for the skull pit, which I wasn’t a fan of anyway. This made the shire fit better, then I removed my sides, as the sticks would make up the walls. Then balancing the shine roughly where I wanted it with Blu-Tack, I eyeballed the length required for my first stick, roughly in the middle on the side, I snapped it to the right length, this also gave a nice rough and ready look. I did this for about four or five sticks placing each one down on my cutting mat side by side. I then completed the process again for a second layer of sticks to sit on top of the first but slightly lower. This was essential for two main reasons: first it would provide the Howdah with a bit of strength; second it would allow me to cover and hide a few errors as I went around the outside of the shrine’s floor plate. Once happy with the positions this section was glued together with PVA glue and allowed to dry overnight. Picture two was taken after construction but provides direct reference to my points above.
Gluing section by section to the Warshrine with superglue, slowly allowed me to build up the wall of my Howdah, this was delicate work as this only provides small contact surface between the wall and the floor plate. Once all the walls were complete I applied green stuff on the underside liberally to increase contact areas and add strength to the model. At this time I also attached the saddle/seats onto the Mammoth and used more green stuff to build them up to make small stands that would allow me to pin the two sections together. This is a bit trial and error, with a lot of marking and remarking but once I was happy with the placement I waited for the green stuff to set, and attached pins to the Mammoth and holes on the underside of the Howdah.
The next day the whole model was sprayed black and then dry brushed up using four browns. Vallejo paints Black Brown, Chocolate Brown, Ochre Brown and Yellow Ochre, mix these 50/50 and end up applying 8 or nine light coats this is very much base colours, as seen in picture two.
I next added a few ornaments and decorations, the chopping block fitted in the Howdah and one of the bone sides of the Warshrine fit nicely on the back of the wall to keep the Chaos feel. I added some cardboard, cut in strips, around the outside of the Howdah at 90 degrees to the coffee sticks, to provide the look of metal banding. Then I added some shields and green stuff moulded to look like nails. These were all painted with base colours as described above, before being glued in place, metal being painted with just a layer of Tin Bitz.
With the construction over apart from crew, I added base colours to areas not yet touched. Flat Flesh for the mammoth’s skin, and Rotting Flesh for wounds. Cavalry Brown for straps and leather and Kamo Karki for bone areas. My painting style is quite basic but I do tend to take my time on each stage, which I help improves my results, but my rule of thumb being: if it’s not simple to do, I won’t be doing it!
The next stage after base colours; for me is usually shades and washes, and this was no different. On the hair and fur I applied a liberal but heavily watered down Earthshade wash, about 10/90% water. I then added a small amount of a Dark Green Ink and then touched the Howdah in places where I would image water damage to the wood, i.e around joins etc. (Not forgetting to do shields and Leather) Then I used Nuln Oil to darken the metal and add shade to the skin, finally mixing Nuln Oil and Earthshade together to add shade to the Bone. These mixes were usually of a 50/50 split and then watered down by half again. I then went back and covered 50% or so of the model again, with the last base colour used, this simple technique I have found adds: shade; depth and then highlight to a basic level, this is what I usually call table top standard. No need for all the complaining about standards, just my opinion :).
I now began work on the highlighting which involved Bleached Bone on the bone areas; I painted in small lines in a continual direction in order to achieve the effect on the horns. Dwarf Flesh on the Mammoth’s skin. Dwarf Bronze and Bolt Gun Metal, on the metal areas and finally a mix of Blood Read and Cavalry Brown into open wounds and edge highlighting for the leather. At this stage I was ready to attach the model to the Warshrine base, which the Mammoth luckily just fits onto, using the same technique covered previously in posts.
This left the finial part of the model the rider; I spent a few weeks thinking about what or who I wanted, but I came to the conclusion to add a model I have previously painted to keep with the feel for the army, it also happened to fit in for a tournament list I was toying with at the time. This model was a Wizard, which would take the Warshrine as a mount. It has actually been a while since I painted this Wizard, so I am not sure of the painting combinations I used at the time, but it mainly comprises of bone, browns, and pinks which fit my army perfectly.
I am really pleased with how the finished model has turned out, probably one of my best, which hopefully shows that you don’t have to be a great painter to produce something nice, and will inspire some of you out there to give something a go. My main advice is even if you have a concept idea, get you bits together and be prepared to let them change as you construct. If anyone has any questions or needs more information please feel free to leave me a comment and I will happily respond. 🙂
Tales from Albian
Hello and welcome to my first instalment of Tales from Albian, I know it’s not right but I made it up.
Where to start? It’s been a long time since I posted anything….that does not to mean to say I have not been doing something. Oh how I wish that I didn’t have so much to paint. My plastic crack partner in crime and I have spent the last few months, ploughing through our latest project, which is the ongoing saga of our Chaos Army of massive proportions….
But wait before I get into that, maybe a short recap for those of you who haven’t read or seen any of my pervious posts. Last year or longer, time disappears in the great eye faster than you think; I posted some pictures of some complete regiments of the Beastmen, Warriors and a stack load of Marauders. As I ploughed through this rank and file, I developed the idea of making my Warriors of Chaos side of this army more Barbarians themed, to add to the overall feral base of this army.
This brings me nicely into this blog post. During my infinite sessions of self torture to the God of Pleasure, I inhaled so much plastic that a funny vision of strapping young man with nothing but a loin cloth and an axe! Now before you all start to switch off like any sane man half way through a Game of Thrones episode, I realised that my old Warriors and Knights for my Slaanesh were a bit plain and over done idea. So my minds eye opened and out popped a horde north of the wall theme. Yes I know you guessed where that came from.
But in my defence I have been experimenting with bases recently and had stumbled upon a swamp and stone technique for making a simple yet effective looking base, plus I had loads of unused snow flock. I combined that with just having finished around 50 Marauders and I was slowly starting to like how I painted skin. (Only after 25 years of painting it.) As you can see this isn’t a million miles away from me making a leap, well small baby step, in the direction of a Barbarian theme.
Enough of my spiel, down to business! Around the core of the units you see above, I decided that I needed a heavier version of each, these in game terms could then be used for Warriors and Knights instead of Horseman and Marauders. This meant that I would have to convert and ultimately paint to a lot better standard than I have been.
Off to eBay I went for some cheep bits to start the conversion work. I started by getting myself some cheep cork sheets recommended to me by my evil twin @CPJohnson80. Luckily I also spotted some new Chaos Knight spares, I damned Tzeentch twice for making me pay stupid P&P costs but I hope it was worth it. Once all my bits arrived I started by constructing 14 heavily armoured horsemen, two of which would be added to the old unit as a command. This effect I achieved by simply adding a few Knights shoulder pads and adding spears axes and shields to all of the models, then layering bits of cork randomly on the bases to achieve the effect below.
Next I set about spray painting the entire model after cleaning up with a craft knife. Once spray painted I proceeded to get some random horseflesh tones down as base colours. I went with one cream (Bleached Bone base), two greys (Shadow Grey) 4 bays (Bestial Brown) and the rest chestnut (Scorched Brown), using the entire unit as a bit of an experiment on flesh tones. Once the base colours were down on the majority of the model I mixed the next tone up from the horse flesh colour I had picked and proceeded to paint small hair lines on large open areas of flesh, to mimic the appearance of horse hair. Once complete I applied a base colour tone wash over the skin to blend into the model, watered down 50/50.
[Undercoat and wash stages.]
Once dry I dry brushed the hair, and finished other parts of the saddle in a Cavalry Brown, again applying a brown ink to add depth. The horse cloth was painted in Warlock Purple and highlighted to Tentacle Pink, finally washed with Magenta Ink watered down to about 25/75 split. Bases flocked, dry brushed and static grass added completing the final look.
Next onto the riders, once again spray black and clean up with a craft knife, remember don’t sacrifice a finger to Khorne. Then I put down base colours, Dark flesh for the skin, and Warlock Purple on the belt and straps, Cavalry Brown on the boots and blue on the trousers for a tartan theme, we are north of the wall, ahhhh see you were all thinking something else weren’t you!
Cover any bone or wraps Scorched Brown, final colour that I have just gotten used to doing, is a Tin Bitz covering all metal parts immediately followed by a slightly watered down Boltgun Silver to give the metal a heavy and used feel, I don’t necessary have to cover all of the Tin Bitz.
The pink on the riders was completed in the same fashion as the horses; the boots and all other leather the same as the horses’ saddle. The bone and wraps slowly layered up through Camo into Bleached, while the metal is just lightly dry brushed with Silver. This leaves just detailing on the trousers and skin. Now I wont pretend to be ‘Pro Painter’ I am sure you will find much better guides on painting skin than I could ever provide but for what it is worth I layered about 4 or 5 layers from Dark Flesh through to Tanned Flesh then Dwarf Flesh, finishing extreme highlights with Elf Flesh on any high raised areas. This wasn’t your normal layered painstakingly for years on end jobs, just a 100-80-60-40 covering mixed 50/50 between each paint, in about 5-6 layers, but where required attention was paid to ensure not to stark a difference, by simply repeating from the layer before if it looked wrong.
Now as you can see they appeared to turn out ok, and in my mind to a high table quality. They also achieved my original aim of looking slightly heavier horse, through the addition of a shoulder pad and spears. The last thing I made was a magnetised base; if you are interested in how to make one I have already covered that in an older post.
Your comments and feedback are most welcome, even if you don’t like them. If this blog series gets enough traction I aim to extend the posts covering this army, so look out for more Tales from Albian.
Follow me on Twitter: @freexerjin